The best second hand Milling Machines with performance of a new one.

Use our filters and select the best brands: Correa or Anayak.

Also select your business sector and contact us by our web form which you could find at the bottom of this page if you still cannot find the Milling Machine searched.

You have filtered by:

Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service Retrofitting used milling machine CORREA CF17D by CORREA Service

CORREA CF17D - 968665

  • IN STOCK

Used CORREA CF17D milling machine, completely retrofitted and with guarantees

 

Control unit HEIDENHAIN TNC-410M.
Travels (X/Y/Z): 2000 / 800 / 800 mm.
Manual milling head (U22) with 3000 rpm.
new tool clamping pedal.
Electronic handwheel HR-130.
External coolant.
Guarding with 2 sliding doors and new perimetral wire-mesh fence.

 

Find out more details about this second hand milling machine!

Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine Retrofitting by CORREA Service - CNC CORREA PRISMA 20 milling machine

CORREA PRISMA 20 - 967519

  • IN STOCK

Retrofitting CORREA PRISMA milling machine by CORREA Service

Control unit HEIDENHAIN TNC-i530.
Travels (X/Y/Z): 2000 / 1000 / 1000 mm.
Manual milling head (U22) with 3000 rpm.
New tool clamping pedal.
New electronic handwheel HR-510.
External coolant.
Guarding with 2 sliding doors and new perimetral wire-mesh fence.

 

 

Find out more details about this second hand milling machine!

Retrofitting CORREA milling machine by CORREA Service Retrofitting CORREA milling machine by CORREA Service Retrofitting CORREA milling machine by CORREA Service Retrofitting CORREA milling machine by CORREA Service Retrofitting CORREA milling machine by CORREA Service Retrofitting CORREA milling machine by CORREA Service Retrofitting CORREA milling machine by CORREA Service Retrofitting CORREA milling machine by CORREA Service Retrofitting CORREA milling machine by CORREA Service Retrofitting CORREA milling machine by CORREA Service Retrofitting CORREA milling machine by CORREA Service

CORREA A30/40 - 6300103

  • REFURBISHMENT ONGOING

Used CORREA A30/40 CNC milling machine with retrofitting by CORREA SERVICE

 

Control unit SELCA 4045D
Traverses (X/Y/Z): 4000 / 1200 / 1250 mm
Universal manual milling head
Electronic handwheel Joystick SELBOX S2
External coolant
Guarding

 

Find out more details used bed type milling machines!

Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine Retrofitting CORREA Service PRISMA 25 milling machine

CORREA PRISMA 25 - 967628

  • REFURBISHMENT ONGOING

Retrofitting CORREA PRISMA milling machine

 

Control unit HEIDENHAIN TNC-530
Travels (X/Y/Z): 2500 / 1000 / 1000 mm
Auto-indexing milling head UDG (every 2,5º)
Automatic tool changer (ATC30)
Chip conveyor
External coolant and high-pressure coolant through spindle
Electronic handwheel HR-420
Perimetral guarding

 

Find out more details!

Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service Retrofitting of CORREA CF25/25 milling machine by CORREA Service

CORREA CF25/25 - 625064

  • REFURBISHMENT ONGOING

Retrofitting CORREA CF25/25 milling machine

 

Control unit HEIDENHAIN TNC-530
Travels (X/Y/Z): 2500 / 1000 / 1500 mm
Auto-indexing head UDG (every 2,5º) / 3.000 rpm
New automatic tool changer (30 tools)
Rear longitudinal chip coveyor
Electronic handwheel HR-410
External coolant and high pressure through spindle
Guarding

 

Find out more details!

Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service Retrofitting CNC CORREA DIANA 20 milling machine by CORREA Service

CORREA DIANA 20 - 624092

  • SOLD

Retrofitting CORREA DIANA milling machine by CORREA Service

 

Control unit HEIDENHAIN TNC-i530
Travels (X/Y/Z): 2000 / 1000 / 1000 mm
Manual milling head (U22) / 3000 r.p.m. (4.000 r.p.m.)
Electronic handwheel HR-510
New Tool clamping pedal
External coolant
Guarding and new perimetral safety fence

 

Find out more details!

New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service New TNC-640 in CNC CORREA CF25/25 - Retrofitting by CORREA Service

CORREA CF25/25 - 625018

  • SOLD

Retrofitting CORREA CF25/25 milling machine

 

Control unit HEIDENHAIN TNC-426
Travels (X/Y/Z): 2500 / 1000 / 1000 mm
Auto-indexing differential head UAD (every 0,1º) / 6.000 rpm
Automatic tool changer (30 tools)
Rear longitudinal chip coveyor
Electronic handwheel HR-410
External coolant & high pressure through spindle
Guarding

 

Find out more details!


Pictures at previous customer, before retrofitting process. 

Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE Retrofitting CORREA CF25/25 milling machine by CORREA SERVICE

CORREA CF25/25 - 625061

  • SOLD

Retrofitting CORREA CF25/25 milling machine


Control unit HEIDENHAIN TNC-530
Travels (X/Y/Z): 2500 / 1000 / 1500 mm
Auto-indexing differential head UAD (every 0,1º) / 6.000 rpm
New automatic tool changer (ATC-30)
Two longitudinal and one transversal chip coveyors 
Electronic handwheel HR-410
External coolant & high pressure through spindle
Full guarding

 

Find out more details about this used bed type milling machine!

Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine Retrofitting used NICOLAS CORREA PRISMA 25 milling machine

CORREA PRISMA 25 - 967553

  • SOLD

Retrofitting CORREA PRISMA milling machine


Control unit HEIDENHAIN TNC-530
Travels (X/Y/Z): 2500 / 1000 / 1000 mm
Auto-indexing milling head UDG40, every 2,5º
Electronic handwheel HR-410
External coolant and option of high pressure through spindle
Guarding

 

Find out more details about this second hand milling machine!

Used NICOLAS CORREA milling machines - NC Service Used NICOLAS CORREA milling machines - NC Service Used NICOLAS CORREA milling machines - NC Service Used NICOLAS CORREA milling machines - NC Service Used NICOLAS CORREA milling machines - NC Service

CORREA A30/30 - 630255

  • SOLD

NICOLAS CORREA A30/30 milling machine – Retrofitting by NC Service

 

Control unit HEIDENHAIN TNC-426
Travels (X/Y/Z): 3000 / 1200 / 1000 mm.
Elongated manual milling head (UL40)
Electronic handwheel HR-130
External & high pressure through spindle coolant
Guarding

 

Find out more details!

View all results

Can't you find the milling machine you want?

Please complete the following form and we'll help you look.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.